Craftsman Professional 8 in. Metal-Cutting Bi-Metal Reciprocating Saw Blades, 10TPI - 5 pk. | Product# 00964490000P
Selling for $19.99
()
This reciprocating saw blade pack from Craftsman Professional contains five 8 in. bi-metal reciprocating saw blades. 10 teeth per inch. Metal-cutting.... |
Craftsman Professional 6 in. Metal-Cutting Bi-Metal Reciprocating Saw Blades, 7-18TPI - 5 pk. | Product# 00964487000P
Selling for $7.99
()
This reciprocating saw blade pack from Craftsman Professional contains five 6 in. bi-metal reciprocating saw blades. 7-18 teeth per inch. Metal-cutting.... |
Craftsman Professional 3 pc. Ship Auger Bit Set | Product# 00966262000P
Selling for $34.99
()
Ship augers are designed with the professional in mind for heavy-duty wood drilling applications - including electrical, plumbing, HVAC and general construction. This ship auger set from Craftsman Professional includes a 1/2 in. auger bit, a 3/4 in. auger bit and a 1 in. auger bit, all with a length of 7-1/2 in.... |
Craftsman 2 in. Carbon Hole Saw | Product# 00966291000P
Selling for $6.99
()
Featuring heat-treated tool steel for fast, clean cutting, this carbon hole saw from Craftsman is great for use on wood, plywood, plastic and wood base. Set includes carbon hole saw and mandrel.... |
Craftsman 5/32 in. x 3 in. Masonry Drill Bit | Product# 00966309000P
Selling for $2.99
()
This masonry drill bit from Craftsman features a chamfered, chip-resistant carbide tip for heavy-duty drilling and reduced breakage. With its slim profile and aggressive cutting angle, this bit drills faster than standard masonry bits.... |
Craftsman 5 pc. Rotary Masonry Drill Bit Set | Product# 00966311000P
Selling for $12.99
()
This rotary drill bit set from Craftsman includes a 5/32 in. x 3 in. bit, a 3/16 in. x 4 in. bit, a 1/4 in. x 4 in. bit, a 5/16 in. x 4 in. bit and a 3/8 in. x 4 in. drill bit. All bits are carbide-tipped for long life and double-fluted for faster, more efficient drilling. Expect up to 5 times the life of a standard rotary masonry drill bit.... |
Craftsman Professional 1 in. x13 in. Carbide Tipped Rotary Percussion Bit | Product# 00966310000P
Selling for $34.99
()
This rotary percussion bit from Craftsman Professional is ideal for drilling concrete, masonry brick, tile, slate and plaster. Its specially formulated carbide tip withstands the impact of hammer drills, and the hardened steel body features extra wide flutes for deeper drilling. For use with hammer drills or rotary drills.... |
Craftsman CompuCarve Replacement Sandpaper Belts | Product# 00921783000P
Selling for $19.99
()
Replacement sandpaper belts for CompuCarve(#21754).... |
Craftsman CompuCarve Memory Card | Product# 00921784000P
Selling for $39.99
()
Memory card for the CompuCarve(#21754).... |
DeWalt Heavy-Duty 7.2V-18V NiCD/NiMH/Li-Ion 1-Hour Charger | Product# 00911069000P
Selling for $87.99
()
This battery charger from DeWalt charges all DeWalt 7.2V - 18V NiCD/NiMH/Li-Ion batteries (except Univolt batteries) in one hour or less, ensuring that you only need one charger for all of your cordless DeWalt products. The DeWalt three-stage charging system provides maximum run-time and extends the overall life of the battery. An LED indicator communicates battery charge status (Charged, Charging, Power Line Problem, Replace Pack, Battery Too Hot, Battery Too Cold).... |
Jacobs Stationary Center (Dead center)--Short Type without flats for No 1 Morse taper | Product# 00988813000P
Selling for $68.99
()
Full tungsten carbide point increases wear resistance for turning or grinding applications and provides longer regrind life.Integral strength of one-piece body resists deflection for positive work holding.Precision ground points provide higher finished part accuracy.... |
Jacobs Stationary Center (Dead center)--Short Type without flats for No 2 Morse taper | Product# 00988814000P
Selling for $80.99
()
Full tungsten carbide point increases wear resistance for turning or grinding applications and provides longer regrind life.Integral strength of one-piece body resists deflection for positive work holding.Precision ground points provide higher finished part accuracy.... |
Jacobs DC4595 DRAIN CHUCK ideal for soil pipe and sewer cleaning tools. Capacity 0.25 | Product# 00988897000P
Selling for $68.99
()
Speciallcy designed for use with flexible coil spring tools. Allows coil spring to pass through chuck. Chuck may be hand tightened to secure coil spring at desired length transmitting tool rotation to shaft.Ideal for soil pipe and sewer cleaning tools.... |
Jacobs 531 Turret Socket to allow using No. 1 Morse taper shank tools in 0.75 Diamet | Product# 00988798000P
Selling for $58.99
()
Permit the use of Morse taper shank tools in straight-hole mounting applications.Through-hardened and precision ground internally and externally.Inside Morse taper sizes 1 through 4.... |
Jacobs 811 Extension Socket to extend tool lengths and application distances for inc | Product# 00988784000P
Selling for $21.99
()
Extend tool lengths and application distances while adapting for increases or decreases in applied tool Morse taper sizes.Externally precision ground with hardened tang.Outside and inside Morse taper sizes are 1 through 5.... |
Jacobs Stationary Center (Dead center)--Long Type with flats for No 2 Morse taper | Product# 00988818000P
Selling for $94.99
()
Full tungsten carbide point increases wear resistance for turning or grinding applications and provides longer regrind life.Integral strength of one-piece body resists deflection for positive work holding.Precision ground points provide higher finished part accuracy.... |
Jacobs 542 TURRET Socket to allow using No. 2 Morse taper shank tools in 1.00 Diamet | Product# 00988799000P
Selling for $32.99
()
Permit the use of Morse taper shank tools in straight-hole mounting applications.Through-hardened and precision ground internally and externally.Inside Morse taper sizes 1 through 4.... |
Jacobs 821 Extension Socket to extend tool lengths and application distances for inc | Product# 00988786000P
Selling for $21.99
()
Extend tool lengths and application distances while adapting for increases or decreases in applied tool Morse taper sizes.Externally precision ground with hardened tang.Outside and inside Morse taper sizes are 1 through 5.... |
Jacobs Stationary Center (Dead center)--Short Type without flats for No 3 Morse taper | Product# 00988815000P
Selling for $99.99
()
Full tungsten carbide point increases wear resistance for turning or grinding applications and provides longer regrind life.Integral strength of one-piece body resists deflection for positive work holding.Precision ground points provide higher finished part accuracy.... |
Jacobs Stationary Center (Dead center)--Long Type with flats for No 3 Morse taper | Product# 00988819000P
Selling for $117.99
()
Full tungsten carbide point increases wear resistance for turning or grinding applications and provides longer regrind life.Integral strength of one-piece body resists deflection for positive work holding.Precision ground points provide higher finished part accuracy.... |
