Craftsman Chuck Adapter Kit | Product# 00932350000P
Selling for $7.99
()
This adapter kit allows the use of 1/8 in. cut-out bits in tools that normally accept 1/4 in. bits, such as routers and laminate trimmers. Using cut-out bits in this manner will decrease bit life. This chuck adapter is not intended nor necessary for use in any Craftsman All-In-One or RotoZip Spiral Saw" tools. Adapter, Hex Key, 1 Multipurpose bit and 1 Drywall bit.... |
Craftsman Drywall Guide Point Bit Pack | Product# 00932351000P
Selling for $9.99
()
1/8 in. cutout bit for drywall with a guide point tip for controlled cuts around outlet boxes. Contains 10 bits.... |
Craftsman Wall Tile Cutout Bit Pack | Product# 00932352000P
Selling for $11.99
()
1/8 in. wall tile cut-out bit designed to cut ceramic tile, marble, cement board and plaster. Not for cutting floor tile. Contains 2 wall tile cut-out bits.... |
Craftsman Multipurpose Cutout Bit Pack | Product# 00932353000P
Selling for $7.99
()
This is a versatile cutout bit. 1/8 in. multipurpose cut-out bit is used for cutting a variety of material including wood, wood composites, fiberglass, solid surface materials, plastic and aluminum/vinyl siding, plastic, lath and laminates. Contains 5 multipurpose cutout bits.... |
Craftsman Cutout Bit Variety Pack | Product# 00932354000P
Selling for $13.99
()
Cutout bit variety pack contains an assortment of 1/8 in. for cutting a wide variety of materials. Contains 2 drywall cutout bits, 3 multipurpose cutout bits and 1 wall tile cut-out bit.... |
Rotozip 5/32 in. Multipurpose Xbit (2 bits) | Product# 00932355000P
Selling for $10.99
()
5/32 in. multipurpose Xbit is designed to meet the rigorous demands of the contractor on the job. The multipurpose Xbit cuts 2 times faster and is 3 times stronger than standard 1/8 in. bits. The multipurpose Xbit cuts woods, plastics, laminates and more.... |
Rotozip 5/32 in. Drywall Xbit (2 bits) | Product# 00932356000P
Selling for $9.99
()
5/32 in. drywall Xbit is designed to meet the rigorous demands of the contractor on the job. The drywall Xbit cuts 2 times faster and is 5 times stronger than standard 1/8 in. drywall bits.... |
Rotozip 5/32 in. Tile Cutting Xbit (1bit) | Product# 00932357000P
Selling for $11.99
()
5/32 in. tile cutting Xbit is designed to meet the rigorous demands of the contractor on the job. The tile cutting Xbit cuts 2 times faster and is 3 times stronger than standard 1/8 in. bits. The tile cutting Xbit cuts ceramic wall tile, marble and cement board.... |
Rotozip 5/32 in. Underlayment Xbit (1bit) | Product# 00932358000P
Selling for $14.99
()
5/32 in. underlayment Xbit is designed to meet the rigorous demands of the contractor on the job. The underlayment Xbit cuts 2 times faster and is 3 times stronger than standard 1/8 in. bits. The underlayment Xbit cuts underlayment and fiber backer board.... |
Craftsman 1/8 in. Grout Removal Bit | Product# 00932359000P
Selling for $14.99
()
1/8 in. grout removal bit with diamond tip. Designed to remove grout from the grout line with a minimum width of 1/8 in. typically found with wall tile. Contains one 1/8 in. grout removal bit.... |
Craftsman 1/4 in. Grout Removal Bit | Product# 00932360000P
Selling for $14.99
()
1/4 in. grout removal bit with diamond tip. Designed to remove grout from the grout line with a minimum width of 1/4 in. typically found with floor tile. Contains one 1/4 in. grout removal bit.... |
Craftsman Right Angle Cut-out Attachment | Product# 00932361000P
Selling for $59.99
()
The right angle cut-out attachment adds cutting, grinding, sanding and polishing capabilities to the All-In-One cutting system tools. The attachment can be fastened to the All-In-One Tool in less than a minute. Contains right angle attachment, metal cutting wheel, masonry cutting wheel and diamond wheel. Wheels are 3-1/2 in. diameter. Only for use with Craftsman All-In-One cutting system tools 9-17244, 17245, 17246, 26561.... |
Craftsman Straight Edge Guide Attachment | Product# 00932362000P
Selling for $19.99
()
Straight edge guide attachment adjusts to make straight edge cuts up to 8-1/2 in. deep from the edge of the material. The straight edge guide works with the All-In-One cutting system tools and the jigsaw handle attachment. Contains straight edge guide attachment and adapter. Only for use with Craftsman All-In-One cutting system tools 9-17244, 17245, 17246, 26561.... |
Craftsman Grout Removal Attachment | Product# 00932364000P
Selling for $24.99
()
Grout removal attachment converts the All-In-One cutting system tools into the perfect grout removal tool. Guide points on the base make it easy to follow the grout lines. Contains grout removal attachment and a 1/4 in. grout removal bit. Only for use with Craftsman All-In-One cutting system tools 9-17244, 17245, 17246, 26561.... |
Craftsman Collet Variety Pack | Product# 00932369000P
Selling for $14.99
()
Collet Variety Pack. These replacement collets can be used with any All-In-One and Roto Zip tools to accept 1/8, 1/4 and 5/32 cutout bits. Contains 1/8 Collet, 1/4 Collet, and 5/32 Collet.... |
Kreg PROJECT PLAN CD (PDF'S) | Product# 00989401000P
Selling for $19.99
()
Kreg Project Plan CD-Rom (All 15 Kreg Plans - PDF Format)... |
Kreg POCKET HOLE JIG DRILLING BOOK | Product# 00989407000P
Selling for $24.99
()
The Pocket Hole Drilling Jig Project Book by Danny Proulx... |
Kreg DVD - CABINETMAKING | Product# 00989501000P
Selling for $9.99
()
Kreg DVD - Pocket Hole Solution to CABINETMAKING... |
Kreg DVD - MAKING TABLES | Product# 00989502000P
Selling for $9.99
()
Kreg DVD - Pocket Hole Solution to TABLES... |
