KD Tools Pulley Holder Pin Set large ( 10mm, 18mm) | Product# 00996390000P
Selling for $13.99
()
Pin set large (Cam pnis, 6 x 10mm, 7.5 x 18mm) for fan clutch service.... |
KD Tools Deburring Tool | Product# 00996393000P
Selling for $11.99
()
Deburring tool for removing rough edges for better flaring tube fit.... |
KD Tools Steering Wheel Pivot Pin Remover | Product# 00996394000P
Selling for $9.99
()
Tilt steering columns are much easier to service when your tool box has one of these piviot pin removers in it. Works on 1969-current GM, Chrysler, and Ford vehicles with Saginaw steering columns.... |
KD Tools 29mm Axle nut socket, GM & Ford | Product# 00996395000P
Selling for $12.99
()
This extra long 1/2 in. drive 6 point metric socket is ideal for heavy-duty use in removing and installing axle nuts. Use with a ratchet, breaker bar, impact wrench, or torque wrench. Size 29MM Deep. Services various late model GM, Ford, and Asian imports.... |
KD Tools 35mm Axle nut socket, GM | Product# 00996396000P
Selling for $14.99
()
This extra long 1/2 in. drive 6 point metric socket is ideal for heavy-duty use in removing and installing axle nuts. Use with a ratchet, breaker bar, impact wrench, or torque wrench. Size 35MM Deep. Services many GM vehicles.... |
KD Tools 38mm Axle nut socket, GM & Ford | Product# 00996397000P
Selling for $15.99
()
This extra long 1/2 in. drive 6 point metric socket is ideal for heavy-duty use in removing and installing axle nuts. Use with a ratchet, breaker bar, impact wrench, or torque wrench. Size 38MM Deep. Services various full-size vehicles including SUV's.... |
KD Tools 4WD Spindle Puller | Product# 00996398000P
Selling for $24.99
()
Removes front spindle to access needle bearing when lubricating and aligning front wheels. 5/8 in. -18 fine thread permits use with slide hammer. Fits spindle thread sizes 2 in.-16, 1-5/8 in.-16 and 38mm-1.5. Applications: Full-size GM, Ford, Jeep and International pickups with Dana front axles, plus Ranger and Bronco II.... |
KD Tools 4-Lug with Extension 1/2-Ton Dana 80 | Product# 00996399000P
Selling for $22.99
()
For high-shear rotating nuts on 1985-newer F250-350 with Dana 80 rear axle and 10-1/4 in. ring gear; 1987-newer E350 with Dana 80 rear axle and 10-1/4 in. ring gear; 1988-newer F super duty with Dana 80 rear axle and 10-1/4 in. ring gear.... |
KD Tools 55MM Lock Nut - 1/2 Drive | Product# 00996400000P
Selling for $20.99
()
55mm lock nut. 1/2 in. Drive.... |
KD Tools 2 Pc. U - Hooks | Product# 00996401000P
Selling for $4.99
()
For radio removal on Ford, VW, & Audi. Works on 1987-current Mustang; 1988-current Tempo/Topaz; 1989-current Continental; 1990-current Taurus/Sable, Probe, Ranger/Bronco II, Crown Victoria/Grand Marquis, Lincoln Town Car, Mark VII, and Thunderbird/Couger... |
KD Tools Radio Removal Keys | Product# 00996402000P
Selling for $17.99
()
For new VW Beetle, Audi, Mercedes Benz. Allen hex wrench for BMW. Special Pentagon pin for BMW.... |
KD Tools Universal Ball Joint Separator | Product# 00996404000P
Selling for $19.99
()
For separating the ball joint from the spindle support arm on domestic and import front wheel drive vehicles. Adjustable for different size ball joints. 1-1/8 in. & 2-1/8 in. (30 & 56mm) maximum opening capacity.... |
KD Tools Tie Rod End Puller and Pitman Arm Puller | Product# 00996405000P
Selling for $17.99
()
Use as a Pitman arm remover for many small domestic rear wheel drive vehicles, or as a tie rod end puller for many domestic and import vehicles. 1-1/16 in. & 2-1/8 in. (27 & 56mm) maximum opening capacity.... |
KD Tools Universal Tie Rod End Remover | Product# 00996406000P
Selling for $37.99
()
For use on imports and many front wheel drive vehicles, includeing SUVs with rack and pinion steering. Live center tip on forcing screw swivels to align tool to tie rod stud to ease in removal and prevent damage to stud.... |
KD Tools 1-13/16 in. (29mm) 1/2 in. Drive Oil Sender Socket | Product# 00996407000P
Selling for $7.99
()
Fits 1-3/16 in. oil pressure sending units found on late-80's and mid-90's GM vehicles. (90mm long)... |
KD Tools 7/8 in. (22mm) Slotted 3/8 Drive PVS, TVS and O2 Socket | Product# 00996408000P
Selling for $11.99
()
Removes and installs vacuum switches with a 7/8 in. hex. Also fits some oxygen sensors (90mm long)... |
KD Tools 1-1/16 in. (27mm) 1/2 in. Drive GM Thermal Sensor Switch Socket | Product# 00996409000P
Selling for $13.99
()
Remove and install 1973-1977 GM thermal sensor switch. Also fits some oil pressure sending units (85mm long)... |
KD Tools 7/8 in. (22mm) Oxygen Sensor Socket | Product# 00996410000P
Selling for $11.99
()
Removes and installs oxygen sensors in most domestic and some imported vehicles. Slotted socket allows for wire clearance. (80mm long)... |
KD Tools 1-1/16 in. 3/8 in. Drive Oil Pressure Sending Unit Socket | Product# 00996411000P
Selling for $3.99
()
Deep well allows for up to 2-58 in. clearance (74mm long). Works on most 1991-current GM vehicles using oil pressure gauge; 4 cylinder & 3.1 liter V6; 1987-current Chrysler vehicles with light and gauge oil pressure switches.... |
KD Tools 7/8 in. (22mm) Oxygen Sensor Socket | Product# 00996412000P
Selling for $13.99
()
Offset end has double hex 1/2 in. drive for access (50mm long)... |
