KD Tools Ford Fan Clutch Wrench, 4.9 L | Product# 00994213000P
Selling for $20.99
()
Wrench removes thermostatic fan assembly on 1993 to current 4.9-L Ford Engines. Use in conjunction with 3136-77 58mm Short Wrench or New Universal Pulley Holder 3471.Both hold pulley while turning square shaft on fan clutch. Wrench opening is 40mm (1.575 in.).... |
KD Tools 3 Pc. Socket Cap Set | Product# 00994215000P
Selling for $16.99
()
Three-piece set includes 1 each of 1/4, 3/8 and 1/2 in. drive socket caps. These tools are used to turn sockets with a wrench or by hand in limited access areas.... |
KD Tools 1/4 in. Dr. Socket Cap | Product# 00996602000P
Selling for $6.99
()
Use this tool to turn sockets with a wrench or by hand in limited access areas.... |
KD Tools 3/8 in. Dr. Socket Cap | Product# 00996603000P
Selling for $7.99
()
Use this tool to turn sockets with a wrench or by hand in limited access areas.... |
KD Tools 1/2 in. Dr. Socket Cap | Product# 00996604000P
Selling for $7.99
()
Use this tool to turn sockets with a wrench or by hand in limited access areas.... |
KD Tools Exhaust Pipe Expander (1-3/8 in. to 1-15/16 in.) | Product# 00994216000P
Selling for $97.99
()
This tool is used to remove clamp grooves and round out crushed or bent exhaust pipes to ensure a tight fit, elimiting exhaust leaks. The hex end allows for the use of a combition wrench to remove clamp grooves or small imperfections or an impact wrench to expand pipes. Imperfections are forced owtward rather than forward, elimiting possible damage to component parts. No holding fixture is necessary. 1-3/8 in. - 1-15/16 in. (35 to 48mm) Heavy-duty tailpipe expander.... |
KD Tools Exhaust Pipe Expander (1-13/16 in. to 2-1/2 in.) | Product# 00994217000P
Selling for $106.99
()
This tool is used to remove clamp grooves and round out crushed or bent exhaust pipes to ensure a tight fit, elimiting exhaust leaks. The hex end allows for the use of a combition wrench to remove clamp grooves or small imperfections or an impact wrench to expand pipes. Imperfections are forced owtward rather than forward, elimiting possible damage to component parts. No holding fixture is necessary. 1-13/16 in. - 2-1/2 in. (46 to 63.5mm) Heavy-duty tailpipe expander.... |
KD Tools GM Oil Pump Primer | Product# 00994218000P
Selling for $33.99
()
Use primers to protect a freshly rebuilt or modified engine from premature wear caused by a dry start.Design includes a machined aluminum collar that simulates the distributor and helps to elimite damaging side loading of the oil pump drive while priming.... |
KD Tools Ford Oil Pump Primer (5/16 in. Hex Dr.) | Product# 00994219000P
Selling for $31.99
()
Use primers to protect a freshly rebuilt or modified engine from premature wear caused by a dry start.Design includes a machined aluminum collar that simulates the distributor and helps to elimite damaging side loading of the oil pump drive while priming.... |
KD Tools Ford Oil Pump Primer (3/8 in. Hex Dr.) | Product# 00994220000P
Selling for $31.99
()
Use primers to protect a freshly rebuilt or modified engine from premature wear caused by a dry start.Design includes a machined aluminum collar that simulates the distributor and helps to elimite damaging side loading of the oil pump drive while priming.... |
KD Tools GM 34mm Deep 1/2 in. Dr. Axle Nut Socket | Product# 00994221000P
Selling for $12.99
()
This extra long 1/2 in. drive 6 point metric socket is ideal for heavy-duty use in removing and installing axle nuts. Use with a ratchet, breaker bar, impact wrench, or torque wrench. Size 34MM Deep... |
KD Tools Mini Sp Ring Pliers | Product# 00994222000P
Selling for $13.99
()
Tool removes and installs interl and exterl sp rings. Its small size allows for use in hard-to-reach areas. Pliers feature comfortable, Plastisol-dipped handles. Tips spread up to 0.75 in.. Tip diameter: 0.038 in.. Individually display packaged.... |
KD Tools Wheel Bearing Locknut Socket (2-1/2 in.) | Product# 00994223000P
Selling for $18.99
()
Tool is used to remove and install the special rounded hex nut found on 1995 and newer Ford F-series and full-size Bronco 4WD trucks with automatic locking hubs.The 3455 fits Ford F-150 and full-size Bronco 4WD trucks and features a thin wall design that provides for easy access.... |
KD Tools Wheel Bearing Locknut Socket (2-3/4 in.) | Product# 00994224000P
Selling for $18.99
()
Tool is used to remove and install the special rounded hex nut found on 1995 and newer Ford F-series and full-size Bronco 4WD trucks with automatic locking hubs. The 3456 fits Ford F-250 and F-350 4WD trucks with automatic locking hubs.... |
KD Tools Tubing Cutter | Product# 00994225000P
Selling for $21.99
()
Tool cuts tubing, copper, brass, aluminum and thin wall conduit. Features a 1/8 to 1-1/8 in. capacity and has a reamer blade to clean off and smooth any sharp edges. Both the cutter wheels and reamer are made of hardened alloy steel.... |
KD Tools Oil Pressure Sending Unit Socket | Product# 00994226000P
Selling for $8.99
()
Use to remove and install oil pressure switches that require a socket with a 1-1/16 in. hex and that are 2-3/4 in. deep. Tool can be used with a 3/8 in. square drive tool or 15/16 in. wrench. Overall length is 3-1/4 in..... |
KD Tools 33 Pc. Fuel Injection System Tool Kit | Product# 00994227000P
Selling for $401.99
()
Set includes fuel line pressure gauges, adapters, and other components required to work on Fuel Injection Systems. Includes storage case.... |
KD Tools 8 Pc. Air Hold and Compression Check Kit | Product# 00994228000P
Selling for $81.99
()
Set includes a compression gauge with protective boot and special air-hold valve for easy reset, one extension, two hand-held adapters and flexible line, with three brass adapters. Includes storage case.Gauge checks from 0 to 300 PSI (0 to 21kg/cm2). Brass adapters are 10mm, 12mm & 14mm and attach to flex line with 14mm & 18mm threads.Brass adapters are: 24mm x 2.0 to test VW, Volvo, Audi, Dodge, Mercedes & Cummings 5.9L. 10mm x 1.0 to test GM 4.3L 6 cyl., 4.3L & 5.7L 8 cyl., Ford/vistar 6.9L &... |
KD Tools Hook and Cotter Pin Puller | Product# 00994229000P
Selling for $7.99
()
This heavy-duty tool is ideal for use anywhere a hook/removal tool is required. The unique tip angle is especially useful for removing cotter pins. The tool features corrosion resistant zinc plating and a high visibility orange robust handle.... |
KD Tools Fan Clutch Wrench - Diesel | Product# 00994231000P
Selling for $25.99
()
Use in conjunction with the Universal Pulley Holder (3471) to remove and replace the thermostatic fan assembly on Ford 6.9L, 7.3L, and 7.3L DIT diesel engines.Use with 1/2 in. drive tools and a torque wrench. Refer to Ford factory service manual for torque specifications and thread direction. Wrench opening is 48mm (1.889 in.).... |
