KD Tools 5/16 in. Stud Removal Socket 3/8 in. Drive | Product# 00996466000P
Selling for $13.99
Designed and tested to reach studs in difficult work areas.... |
KD Tools 1/4 in. Stud Removal Socket 3/8 in. Drive | Product# 00996467000P
Selling for $13.99
Designed and tested to reach studs in difficult work areas.... |
KD Tools 3 Pc. Oil Pump Primer Kit | Product# 00996468000P
Selling for $45.99
###############################################################################################################################################################################################################################################################... |
KD Tools General Purpose Bushing Driver Kit | Product# 00996469000P
Selling for $45.99
Perfect for removing and inserting bushings in cars, trucks, buses, tractors, construction and off-road equipment. This set includes small, medium and large drivers and bushing adapters from 3/8 in. to 1-3/8 in.. Kit includes the following Bushing Adapters: (3/8 in.-7/16 in.), (7/16 in.-1/2 in.), (15/32 in.-17/32 in.), (1/2 in.-5/8 in.), (9/16 in.-11/16 in.), (5/8 in.-11/16 in.), (5/8 in.-3/4 in.), (11/16 in.-13/16 in.), (3/4 in.-7/8 in.), (13/16 in.-15/16 in.), (7/8 in.-1 in.), (15/16 in.-1-1/1... |
KD Tools Metric and SAE Clutch Alignment Kit | Product# 00996470000P
Selling for $47.99
Aligns single disc clutches on domestic and imported cars, light trucks and tractors. Includes 2 Pc. Driver bars (SAE & Metric), 3 Pc. Cone set (SAE & 2 Metric), 7 Pc. SAE bushing set and 5 Pc. Metric bushing set. Packaged in plastic storage case.... |
KD Tools 3 Pc. Oil Filter Canister Socket Kit | Product# 00996471000P
Selling for $37.99
Specially designed low profile sockets for the removal of oil filter canisters and covers. Includes the following oil filter cap wrenches: 27mm (VW), 32mm (GM, Saturn) 36mm (Volvo, VW, Ford Trucks). Packaged in plastic storage case.... |
KD Tools Interchangeable Points Set | Product# 00993940000P
Selling for $5.99
Set includes 5 pairs of interchangeable points and 1 pair of point clamps with 2 screws for snap ring pliers 2011, 445 and 446.Set includes 1 pair each of the following sizes: 0.039 15, 0.047 15, 0.074 15, 0.039 45 and 0.047 90. Use a 5/64 in. hex key when replacing points. Hex stock size of tips .092 in.... |
KD Tools Oil-Seal Remover and Installer | Product# 00993945000P
Selling for $29.99
Tool removes and installs upper rear main oil seals with engine and crank-shaft in place. It works on both wick- and neoprene-type seals. Chinese Finger-type grip wont slip from the seal during installation. Set includes a wick seal remover, installer, guide funnels, pusher, offset trimmer and neoprene seal punches.... |
KD Tools Valve Grinder (5/8 in., 13/16 in. Diameter) | Product# 00993946000P
Selling for $4.99
Hand grind small and large flat-head unslotted valves. Textured handle and thin wall suction cups make grinding easy. To use, place grinding compound on valve face and put in seat. Put suction cup on valve head and turn handle between hands to grind. There are 2 sizes per tool.... |
KD Tools Suspension Service Kit | Product# 00996475000P
Selling for $159.99
For removal of tie rods and ball joints on most U.S. and Import vehicles. Kit includes Ball Joint Separator, Tie Rod Separator, Pitman Arm Puller Yoke, Pitman Arm Puller Center Screw and Deluxe Inner Tie Rod Tool... |
KD Tools Nut Cracker | Product# 00993948000P
Selling for $30.99
Splits most stubborn nuts 7/16 in. (11mm) through 3/4 in. (19mm) across the flats. Ideal for work on shocks, mufflers and tailpipes. Consists of a hardened steel chisel driven by a large steel screw.Simply tighten the screw until the nut splits. Do not use on heat-treated nuts. Length: 4 in..... |
KD Tools Air Hold Fitting Set | Product# 00993949000P
Selling for $5.99
Use to apply air pressure to keep valve closed while replacing valve spring. Set includes 14 and 18mm adapters threaded for 1/4 in. NPT. To use, remove spark plug and screw air hold into port. Fasten air hose to fitting and apply pressure. Use with 912, 2078, 3087 or 3271 Valve Spring Compressors.... |
KD Tools Emergency Snap Ring Assortment | Product# 00993950000P
Selling for $10.99
Set includes the 52 most popular internal and external snap rings for emergency repairs on autos, industrial equipment and home appliances. Actual-size silhouette chart is packed with each set for easy identification of snap rings.... |
Craftsman Retaining Ring Pliers, Small | Product# 00947411000P
Selling for $19.99
Convertible internal and external pliers for use on rings up to 1 in. in diameter. To convert pliers between internal and external applications, simply flip the switch and squeeze the handles. Applicable ring range size: 1/4 in. - 1 in. (8mm - 26mm) internal, and 1/8 in. - 1 in. (3mm - 26mm) external. Handles are nickel-chrome plated for lasting appearance and protection from rust and corrosion. The double-dipped custom grips are made of low-temperature, high-impact material for durability and comfort. The plier includes an adjustable stop for keeping the jaw opening set during repetitive work processes. Kit includes five pairs of durable alloy, color-coded, interchangeable tips, straight and 90 degree, and a hex key wrench all stored in a handy pouch. Tip sizes included: 0.023 in. (0.6mm), 0.036 in. (0.9mm), 0.047 in. (1.2mm) straight, and 0.036 in. (0.9mm), 0.047 in. (1.2mm) bent 90 degrees.... |
KD Tools Universal Overhead Valve Spring Compressor | Product# 00994097000P
Selling for $33.99
Remove valve springs on most cars with overhead valves without removing the cylinder head. Offset jaws grip the valve spring in parallel compression.Tool maintains constant length as spring is compressed. Use with 901 or 2992 Air Hold Fittings to keep valve in place.... |
KD Tools All-Purpose Scraper and Sticker Remover | Product# 00994098000P
Selling for $7.99
Remove inspection stickers, dealer price labels and paint from glass. Tool locks into 3 operating positions to reach hard-to-get-at slanting windshields and uses single-edge razor blades. Cutting edge folds into the handle for safe storage. Replacement part: 2106-75 Blades (package of 5)... |
KD Tools Ball Joint Separator | Product# 00994120000P
Selling for $21.99
Tool separates ball joints from steering knuckles. To use, insert 15/16 in. opening between parts and strike with hammer. Separator is forged to withstand hard usage. Overall length: 12 in..... |
KD Tools Tie Rod Separator | Product# 00994121000P
Selling for $24.99
This powerful tool separates tie rods. Insert 21/32 in. opening between parts and strike with hammer to separate. Separator is forged to withstand hard usage. Overall length: 12 in..... |
KD Tools Pulley Holder / Fan Clutch Tool Kit | Product# 00994230000P
Selling for $70.99
Includes the Universal Pulley Holder part # 3471 plus fan clutch wrenches # 3422 and 3136-76. Used to remove and replace thermostatic fan assemblies while elimiting the need for various size holding wrenches.Applications include: Ford trucks w/2.8L, 2.9L, 3.0L, 4.0L, 4.9L, and 5.0L engines. Dodge trucks w/3.9L, 5.2L, 5.9L, 8.0L V10 engines. GM trucks w/4.3L, 5.0L and 5.7L engines. Jeeps w/5.2L engines.... |
KD Tools Ford A/C and Fuel Line Spring Lock Coupling Tool | Product# 00994197000P
Selling for $16.99
Most Ford vehicles are equipped with spring lock couplings on fuel and air conditioning lines. Necessary tool releases locking mechanism on all 4 sizes: A (3/4 in.), B (5/8 in.), C (1/2 in.) and D (3/8 in.).... |
