KD Tools Master Bolt Grip Set | Product# 00996434000P
Selling for $60.99
Works on harmonic balancers, steering wheels, crankshaft pulleys, and gears. Capable of handling almost every two or three-way bolt pull possible on most cars, pick-ups, SUVs and small engines. Set includes: Two or three way yoke, 4 Pc. Tip set, Metric bolt set, SAE bolt set and Center screw for puller (2). Packaged in plastic storage case.... |
KD Tools Steering Wheel Puller Kit | Product# 00996435000P
Selling for $51.99
This kit has what it takes to remove a steering wheel from most domestic cars with or without telescoping tilt columns. Use the puller legs with the steering wheel puller to remove steering wheels on late model GM vehicles. Steering wheel lock-plate depressor also included. Set includes: Puller yoke and screw extension bushing, Lock plate removal tool, 2 Pc. Puller leg package, Pivot Pin, Lock Plate depressor frame, Lock Plate remover collars & nut washer, and screw package. Packaged in plalst... |
KD Tools 6mm Stud Removal Socket 3/8 in. Drive | Product# 00996460000P
Selling for $13.99
Designed and tested to reach studs in difficult work areas.... |
KD Tools 8mm Stud Removal Socket 3/8 in. Drive | Product# 00996461000P
Selling for $13.99
Designed and tested to reach studs in difficult work areas.... |
KD Tools 10mm Stud Removal Socket 1/2 in. Drive | Product# 00996462000P
Selling for $13.99
Designed and tested to reach studs in difficult work areas.... |
KD Tools 12mm Stud Removal Socket 1/2 in. Drive | Product# 00996463000P
Selling for $13.99
Designed and tested to reach studs in difficult work areas.... |
KD Tools Bearing Race and Seal Kit | Product# 00996437000P
Selling for $61.99
Allows you to intall tapered bearing races and seals without damage to the component or housing. Includes a driver handle plus 9 popular bearing and seal drivers ranging from 1.565 in. to 3.180 in.. In addition to the driver handle, this kit includes the following drivers: 1.565 in., 1.750 in., 1.961 in., 2.325 in., 2.470 in., 2.555 in., 2.830 in., 2.995 in., and 3.180 in.. Packaged in plastic storage case.... |
KD Tools 7 Pc. Axle Nut Set | Product# 00996438000P
Selling for $78.99
These 7 extra long 1/2 in. drive 6 point metric sockets are ideal for heavy-duty use in removing and installing axle nuts. Use with a ratchet, breaker bar, impact wrench or torque wrench. Kit includes the following sizes: 29mm, 30mm, 32mm, 34mm, 35mm, 36mm, and 38mm. Packaged in plastic storage case.... |
KD Tools 6 Pc. Spindle Nut Set | Product# 00996439000P
Selling for $81.99
These 6 chrome vanadium steel 1/2 in. drive sockets are for most 4WD SUV and light truck axle lockut applications. Use with a torque wrench, ratchet or breaker bar. Kit includes: 4-Lug 4WD Spindle Nut socket 1/2 to 3/4 Ton Dana 44, 6-Lug 4WD Spindle Nut socket 3/4 to 1 Ton Dana 44, 4-Lug with extension 1/2-Ton Dana 80, 4WD Spindle puller, Toyota Locknut tool, 4-Lug 4WD Spindle Nut Socket 1/2 Ton Dana 50. Kit packaged in plastic storage case.... |
KD Tools 7 Pc. Locknut Kit | Product# 00996443000P
Selling for $82.99
Perfect for late model Ford, Dodge and Toyota trucks. This versatile kit contains seven of the most popular wheel bearing locknut sockets. Kit includes the following locknut sockets: 2-3/8 in. Hex, 2-3/8 in. Rounded Hex, 2-1/2 in. Hex, 2-9/16 in. Rounded Hex, 2-1/2 in. Rounded Hex, 2-3/4 in. Rounded Hex, and 55mm Hex. Kit packaged in plastic storage case.... |
KD Tools Radio Removal & Antenna Wrench Kit | Product# 00996444000P
Selling for $64.99
Kit includes the tools needed to remove the radio from the dash on many domestic and import vehicles without damage to the radio or the dash panel. Antenna nut sockets fit over antennas and down into deep well locations. Kit includes: Ford radio removal tool, Key Set and Antenna nut socket set. Packaged in plastic storage case.... |
KD Tools Front End Service Kit | Product# 00996453000P
Selling for $125.99
This versatile kit allows for easy removal of the most popular types of Pitman arms, tie rods, and ball joints. Includes Pitman Arm Puller 22 x 140mm, Tie rod puller, Univeral ball joint separator, Tie rod end puller and Pitman arm puller, and Universal tie rod end remover. Packaged in plastic storage case.... |
KD Tools Slide Hammer Puller Kit | Product# 00996454000P
Selling for $114.99
This kit provides a wide range of puller applications such as: Flange-type axles, oil seals and other press fit parts. Jaws can be set up for 2 or 3 jaw internal or external pulling jobs. Includes Shallow flange, Deep flange, Slide hammer, 2 way yoke, 3 way yoke, Center Bolt and Cone, 3 Pc. Adapter set, and Leg package with screws. Packaged in plastic storage case.... |
KD Tools Rear Axle Bearing Puller Kit | Product# 00996455000P
Selling for $41.99
Three pullers designed to make the removal of semi-floating rear axle bearings easier on most domestic cars. Includes: 1 in. x 1-7/8 in. puller, 1-5/16 in. x 2-3/8 in. puller, 1-3/8 in. x 2-7/8 in. puller. Packaged in plastic storage case.... |
KD Tools 8 Pc. Master Sensor Socket Kit | Product# 00996456000P
Selling for $63.99
Designed for the removal and installation of oxygen sensors, oil pressure sending units, and vacuum switches. Set includes: 1-13/16 in. (29mm) 1/2 in. drive oil sensor socket, 7/8 in. (22mm) slotted 3/8 in. drive PVS, TVS & O2 socket, 1-1/16 in. (27mm) 1/2 in. drive GM thermal sensor switch socket, 7/8 in. (22mm) Oxygen sensor socket, 1-1/16 in. Oil pressure sending unit socket 3/8 in. drive, 7/8 in. (22mm) Oxygen sensor socket, 7/8 in. (22mm) Low profile offset oxygen sensor socket, and 1-1/16... |
KD Tools 3pc Spark Plug Service Set | Product# 00996457000P
Selling for $45.99
This kit contains long reach magnetic swivel spark plug sockets. Covers sizes 5/8 in., 13/16 in. and the new 9/16 in. on Ford Triton engines. Includes 6 inch 5/8 in. Swivel Magnetic spark plug socket, 6 inch 13/16 in. Swivel Magnetic spark plug socket and 2.5 inch 9/16 in. Magnetic spark plug socket. Packaged in plastic storage case.... |
KD Tools Harmonic Balancer Puller Kit | Product# 00996458000P
Selling for $91.99
Removes and installs the harmonic balancer on most popular Chrysler, Hyundai and Mazda without removing the radiator. Includes Puller body, Pin set and Holding ring. Packaged in plastic storage case.... |
KD Tools 8 Pc. Metric and SAE Stud Removal Kit | Product# 00996459000P
Selling for $60.99
Complete SAE and Metric stud remover set offer the best professional extractors available. Designed and tested to reach studs in difficult work areas. Includes the following remover sockets: 3/8 in. Drive (6mm, 8mm, 5/16 in. and 1/4 in.) 1/2 in. Drive (10mm, 12mm, 3/8 in. and 7/16 in.). Packaged in plastic storage case.... |
KD Tools 3/8 in. Stud Removal Socket 1/2 in. Drive | Product# 00996464000P
Selling for $13.99
Designed and tested to reach studs in difficult work areas.... |
KD Tools 7/16 in. Stud Removal Socket 1/2 in. Drive | Product# 00996465000P
Selling for $13.99
Designed and tested to reach studs in difficult work areas.... |
