KD Tools Torque Angle Gauge | Product# 00994203000P
Selling for $21.99
Use this mechanical gauge with a 1/2 in. drive tool to install various engineering fasteners that require a specified angle application after a pre-torque load has been applied. Tool is calibrated in 5 increments with a rotating pointer. 1/2 in. male and female square drive and adjustable holding rod hold the gauge in position during use. Gauge is packaged in a convenient storage pouch.... |
KD Tools GM-Ford Disc Brake Piston Tool | Product# 00994205000P
Selling for $13.99
Tool rotates the piston back on GM and Ford vehicles equipped with rear wheel disc brakes. Fits GM vehicles with 2-1/8 and 1-7/8 in. pistons and Ford vehicles 1987 to current with rear disc brakes. Use in conjunction with 3/8 in. square drive tool.Ford Applications:1987 to current: T-Bird1988 to current: Continental, Mark VII1990 to current: Probe, Taurus/Sable1991 to current: Town Car1992 to current: Crown Victoria, Cougar, Grand Marquis... |
KD Tools EFI Ford Spring Lock Fitting | Product# 00996588000P
Selling for $42.99
Allows use of the KD 3386 EFI Pressure Tester on Ford multiport EFI Systems. Use with 1/2 in. spring lock-type access fitting.... |
KD Tools Ford Fuel Line Coupling Tool | Product# 00994209000P
Selling for $10.99
Use on 1990 and newer Ford Rangers and Explorers with 4.0-L, 6-cylinder engines. Provides easy, damage-free fuel line separation, at the fuel pressure regulators. CAUTION: Relieve system pressure before using. For intended use only.... |
KD Tools Ford Module Wrench | Product# 00994210000P
Selling for $16.99
Use wrench to remove and install Ford ignition modules without removing or moving distributor. Dual-ended ratchet wrench features both 7/32 in. (5.5mm) and T-20 Torx for most Ford applications. Wrench is designed with 25 offset to fit in confined areas.... |
KD Tools Ford Clutch Coupling Tool | Product# 00994211000P
Selling for $5.99
This tool is used to release fingers that hold clutch line to the clutch sleeve cylinders. Works on hard to access couplings found on Ford light-duty trucks, Bronco II, Ranger, Explorer and 1989 to currentThunderbird and Cougar vehicles with hydraulic clutch. Will also work on the following vehicles with hydraulic clutch: 1993 to current Pontiac Grand Prix, Oldsmobile Cutlass Supreme, Buick Regal,1993-94 Chevy Lumi, and 1995 to current Chevrolet Monte Carlo.... |
KD Tools Ford Fan Clutch Wrench, 4.9 L | Product# 00994213000P
Selling for $20.99
Wrench removes thermostatic fan assembly on 1993 to current 4.9-L Ford Engines. Use in conjunction with 3136-77 58mm Short Wrench or New Universal Pulley Holder 3471.Both hold pulley while turning square shaft on fan clutch. Wrench opening is 40mm (1.575 in.).... |
KD Tools 3 Pc. Socket Cap Set | Product# 00994215000P
Selling for $16.99
Three-piece set includes 1 each of 1/4, 3/8 and 1/2 in. drive socket caps. These tools are used to turn sockets with a wrench or by hand in limited access areas.... |
KD Tools 1/4 in. Dr. Socket Cap | Product# 00996602000P
Selling for $6.99
Use this tool to turn sockets with a wrench or by hand in limited access areas.... |
KD Tools 3/8 in. Dr. Socket Cap | Product# 00996603000P
Selling for $7.99
Use this tool to turn sockets with a wrench or by hand in limited access areas.... |
KD Tools 1/2 in. Dr. Socket Cap | Product# 00996604000P
Selling for $7.99
Use this tool to turn sockets with a wrench or by hand in limited access areas.... |
KD Tools Exhaust Pipe Expander (1-3/8 in. to 1-15/16 in.) | Product# 00994216000P
Selling for $97.99
This tool is used to remove clamp grooves and round out crushed or bent exhaust pipes to ensure a tight fit, elimiting exhaust leaks. The hex end allows for the use of a combition wrench to remove clamp grooves or small imperfections or an impact wrench to expand pipes. Imperfections are forced owtward rather than forward, elimiting possible damage to component parts. No holding fixture is necessary. 1-3/8 in. - 1-15/16 in. (35 to 48mm) Heavy-duty tailpipe expander.... |
KD Tools Exhaust Pipe Expander (1-13/16 in. to 2-1/2 in.) | Product# 00994217000P
Selling for $106.99
This tool is used to remove clamp grooves and round out crushed or bent exhaust pipes to ensure a tight fit, elimiting exhaust leaks. The hex end allows for the use of a combition wrench to remove clamp grooves or small imperfections or an impact wrench to expand pipes. Imperfections are forced owtward rather than forward, elimiting possible damage to component parts. No holding fixture is necessary. 1-13/16 in. - 2-1/2 in. (46 to 63.5mm) Heavy-duty tailpipe expander.... |
KD Tools GM Oil Pump Primer | Product# 00994218000P
Selling for $33.99
Use primers to protect a freshly rebuilt or modified engine from premature wear caused by a dry start.Design includes a machined aluminum collar that simulates the distributor and helps to elimite damaging side loading of the oil pump drive while priming.... |
KD Tools Ford Oil Pump Primer (5/16 in. Hex Dr.) | Product# 00994219000P
Selling for $31.99
Use primers to protect a freshly rebuilt or modified engine from premature wear caused by a dry start.Design includes a machined aluminum collar that simulates the distributor and helps to elimite damaging side loading of the oil pump drive while priming.... |
KD Tools Ford Oil Pump Primer (3/8 in. Hex Dr.) | Product# 00994220000P
Selling for $31.99
Use primers to protect a freshly rebuilt or modified engine from premature wear caused by a dry start.Design includes a machined aluminum collar that simulates the distributor and helps to elimite damaging side loading of the oil pump drive while priming.... |
KD Tools GM 34mm Deep 1/2 in. Dr. Axle Nut Socket | Product# 00994221000P
Selling for $12.99
This extra long 1/2 in. drive 6 point metric socket is ideal for heavy-duty use in removing and installing axle nuts. Use with a ratchet, breaker bar, impact wrench, or torque wrench. Size 34MM Deep... |
KD Tools Mini Sp Ring Pliers | Product# 00994222000P
Selling for $13.99
Tool removes and installs interl and exterl sp rings. Its small size allows for use in hard-to-reach areas. Pliers feature comfortable, Plastisol-dipped handles. Tips spread up to 0.75 in.. Tip diameter: 0.038 in.. Individually display packaged.... |
KD Tools Wheel Bearing Locknut Socket (2-1/2 in.) | Product# 00994223000P
Selling for $18.99
Tool is used to remove and install the special rounded hex nut found on 1995 and newer Ford F-series and full-size Bronco 4WD trucks with automatic locking hubs.The 3455 fits Ford F-150 and full-size Bronco 4WD trucks and features a thin wall design that provides for easy access.... |
KD Tools Wheel Bearing Locknut Socket (2-3/4 in.) | Product# 00994224000P
Selling for $18.99
Tool is used to remove and install the special rounded hex nut found on 1995 and newer Ford F-series and full-size Bronco 4WD trucks with automatic locking hubs. The 3456 fits Ford F-250 and F-350 4WD trucks with automatic locking hubs.... |
