KD Tools GM Disc Brake Caliper Wrench | Product# 00994106000P
Selling for $2.99
Wrench turns hex socket cap bolts on some GM disc brake calipers for easy removal and installation. Tool is specially designed for this hard-to-reach area. Hex size 3/8 in.... |
KD Tools Ignition File | Product# 00994107000P
Selling for $1.99
Use tool to file ignition points and other small objects. The thin blade has a fine grit on both sides and is ideal for removing carbon from points.... |
KD Tools Phillips Screw Starter | Product# 00994119000P
Selling for $8.99
Twist bit to firmly hold Phillips screws for easy starting in hard-to-reach areas. Strong magnet on opposite end retrieves dropped parts. Includes a pocket clip. Length 5-5/8 in.... |
KD Tools Electrical Wire Stripper and Crimper | Product# 00994108000P
Selling for $18.99
This all-purpose electrical tool includes a pliers-type nose, crimper, wire cutter, stripper and bolt cutter. The nose has a serrated jaw to pull, loop and twist wire. The crimper works on 7 and 8mm noninsulated termils and electrical 22-20 to 22-10 insulated termils. Wire cutters and strippers at the front strip have wire sizes 22-20 and 22-10. The bolt cutter works on bolt sizes 4-40, 5-40, 5-32, 8-32, 10-32 and 10-24. Tool features comfortable cushion-grip handles.... |
KD Tools Flaring Tool | Product# 00994109000P
Selling for $34.99
Accurately flare 7 tubing sizes to SAE 45 flares. Sizes are 3/16, 1/4, 5/16, 3/8, 7/16, 1/2 and 5/8 in.. Do not use on steel tubing.... |
KD Tools Dual Brake Bleeder Adapter | Product# 00994110000P
Selling for $46.99
Use adapter with 2222 or 2901 Brake Bleeder Tanks to pressurize brake systems on cars 1967 to present with master cylinder reservoirs up to 3-3/16 x 6-3/16 in..Tool is ideal for large master cylinders used on disc brake models. Gasket prevents leakage. For use on metal reservoirs only. Replacement part: 2417-75 Chain. Replacement part 2417-76 1 Hook Assembly... |
KD Tools Non-Magnetic Feeler Gauge | Product# 00994111000P
Selling for $2.99
6-blade gauge measures clearance in electronic ignition systems where non-magnetic blades are required. These hard brass blades will not magnetize.Blade Lengths: 3-5/16 in. long. Blade sizes: Inches (.006, .008, .010, .012, .014, .016); Millimeters (.152, .203, .254, .305, .356, .406)... |
KD Tools Heavy Duty Universal Wheel Hub Puller | Product# 00994113000P
Selling for $200.99
Use to pull wheel hubs where the bolt circle does not exceed 7-1/2 in.. Tool quickly adjusts to fit any hub, regardless of the number of wheel studs.Replacement part: 2251-74 Striking Wrench... |
KD Tools Slide Hammer Puller Set | Product# 00994114000P
Selling for $129.99
An extremely versatile puller which will accomplish many pulling jobs involving gears, bearings, outer races, grease retainers, oil seals, etc. Either two or three puller jaws may be used to handle insidepulling jobs such as bearing cups and outer races, as well as regular outside pulling jobs. In addition to these uses, the basic slide hammer unit can be removed and used independently. This puller includes 5 lb. hammer, 2-way and 3-way head, 27 in. long. Wt: 8 lbs.... |
KD Tools Serrated Wrench (8mm) | Product# 00994124000P
Selling for $5.99
Install and remove 12-point (triple square) metric socket-head screws by turning with a socket or wrench. Made from heat-treated alloy steel. Size 8mm. Hex size 5/16 in.. Length 3 in.... |
KD Tools Metric Feeler Gauge | Product# 00994117000P
Selling for $9.99
25-blade gauge measures clearances from 0.04 to 1mm. Blade sizes:0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35,0.40, 0.45, 0.50, 0.55, 0.60, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90, 0.95 and 1mm. Blade Lengths: 3 in. long... |
KD Tools Battery Carrying Strap | Product# 00994118000P
Selling for $11.99
Carry top and side-mounted termil batteries with this strong, plastic strap. The ends are marked and sized to accurately fit positive and negative termils.Battery acid does not harm the strap. It can also be used as a charging adapter on side-mounted termil batteries. Length: 14 in..... |
KD Tools Body Dent Remover | Product# 00994122000P
Selling for $40.99
Pulls dented sheet metal back into place. To use, drill a hole in the deepest part of the dent, insert the hook or self-threading screw tip and tap lightly with the 2-1/2-lb slide hammer to remove the dent.13 in.-long shaft ebles high pulling force. Slide hammer shaft has a 1/2-13 UNC thread. Handle Length: 3.75 in.. Replacement part: 2290-70 Hook and Screw package. Replacement part: 2290-76 Nose Nut... |
KD Tools Flange-type Axle Puller | Product# 00994123000P
Selling for $78.99
Tool pulls rear axle on American made cars and 1/2-ton trucks with flange-type axle. Yoke fits axles with 4, 5 or 6 studs in a circle from 4-1/2 to 5-1/2 in. in diameter. A 5-lb. slide hammer makes removal easy.Slide hammer and yoke are 5/8 in.-18 UNF thread. Replacement part: 2300-71 Yoke (standard). Replacement part 2300-75 Yoke (compacts) 3-3/4 to 4-1/2 in. Bolt Circle... |
KD Tools Serrated Wrench (10mm) | Product# 00994125000P
Selling for $5.99
Install and remove 12-point (triple square) metric socket-head screws by turning with a socket or wrench. Made from heat-treated alloy steel. Size 10mm. Hex size 1/2 in.. Length 3-1/4 in.... |
KD Tools Serrated Wrench (12mm) | Product# 00994126000P
Selling for $5.99
Install and remove 12-point (triple square) metric socket-head screws by turning with a socket or wrench. Made from heat-treated alloy steel. Size 12mm. Hex size 1/2 in.. Length 3-3/4 in.... |
KD Tools Stainless Steel Brush | Product# 00994127000P
Selling for $6.99
Brush has hand-tied stainless steel tufts for cleaning corrosion from parts without scratching. Brush size: 3/8 x 1-3/8 in.. Handle length: 7 in..... |
KD Tools Curved Handle Wire Scratch Brush | Product# 00994128000P
Selling for $4.99
Clean carbon, dirt and paint from metal and other surfaces with this wooden-handle brush. Overall length: approximately 14 in.. Bristle area: 3 x 19 rows, 1-1/8 in. time and 6 in. long.... |
KD Tools Shoe Handle Wire Scratch Brush | Product# 00994129000P
Selling for $4.99
Use this hardwood-handle brush to clean dirt, carbon and rust from metal and other surfaces. Bristles are densely packed over 5-1/4 in.. Overall length: approximately 10 in.. Bristle area: 4 x 16 rows and 1-1/8 in. trim.... |
KD Tools 1 in. Crimped Wire-End Brush | Product# 00994130000P
Selling for $6.99
Brush removes dirt, rust and paint from metal and other surfaces. It is designed for general-purpose cleaning with 0.020 in. industrial crimped wire.Use in electrical drills, pneumatic tools or flexible shaft equipment. Face diameter: 1 in.. Shank diameter: 1/4 in.. Maximum safe free speed: 20,000 rpm.... |
