Johnson 24 in. Alum Box Beam Level | Product# 00979950000P
Selling for $35.99
()
Solid block acrylic vials won ft.t fog, leak or break. Heavy-duty box aluminum frame is Job Site Tough. Precision milled edges assure accuracy. Ergonomic rubberized hand grips. Anti-Slip/Anti-Shock removable end caps protect frame.... |
Hans Plad Qwikie" 10 pc. Tri - Scraper Blade Replacement Pack | Product# 03015773000P
Selling for $1.99
()
This replacement pack from Qwikie" comes with five hard acrylic blades and five softer polypropylene blades that work great on delicate surfaces.... |
Nupla Handi-Hammer 10 oz. Handleless Power Drive Dead Blow Hammer | Product# 00979533000P
Selling for $10.99
()
Light-Duty handleless hammer with dead blow technology delivers a powerful driving force in tight, restricted areas. Has one steel end for driving nails and tough work, and one soft face for non-marring applications.... |
Nupla Handi-Hammer 14 oz. Handleless Power Drive Dead Blow Hammer | Product# 00979534000P
Selling for $14.99
()
Heavy-Duty handleless hammer with dead blow technology delivers a powerful driving force in tight, restricted areas. Has one steel end for driving nails and tough work, and one soft face for non-marring applications.... |
Craftsman 7.2V NiCd Screwdriver with Bit Set | Product# 00911779000P
Selling for $34.99
()
Features a 2-speed gearbox, a 1/4-inch hex collet, automatic spindle lock, and built-in LED worklight. Dual gear ranges make this screwdriver suitable for almost any job. The lower range speed (200 RPM) is for higher torque applications such as driving screws. The higher speed (600 RPM) is suited for drilling. Includes charger, 20 bits, and case for easy transporting and storage.... |
Craftsman Professional Universal Bench Tool Work Stand | Product# 00922338000P
Selling for $199.99
()
The Craftsman Professional Universal Bench-Tool Work Stand has a 592 sq. in. work surface to accommodate a variety of bench top tools. This heavy-duty contender has a maximum load capacity of 300 lbs. and can be moved or stored with the bench-top tool still attached. This stand is equipped with dual, height-adjustable, ball bearing roller extension arms that support work pieces up to 8 ft. in length. Maximum extension of the roller arms is 35 in. left and 3-1/2 in. right. The heavy-duty work stand features square-section steel legs with cross supports for strength and durability. Its tabletop measures 30 in. x 19-3/4 in. and has pre-stamped slots for securing bench top tools with different mounting-hole patterns. When fully-extended, the table height is 34 in. The 10-in. non-marring, semi-pneumatic wheels located on the back end of the stand allow easy transport over rough terrain, even with a tool mounted to the tabletop. A set of smaller auxiliary wheels in front assist in rolling the stand across truck or other vehicle beds. A 20 in. flexible-neck work light is attached to the tabletop and uses a 40-watt bulb (not included). An integrated keyed safety switch helps prevent unauthorized use and incorporates a manual-reset overload protector. The stand is equipped with a 10 ft. cord and cord wrap.The work stand stores vertically or horizontally. A lower foot near the rear wheels stabilizes the folded stand when stored upright, and also serves as a handle for transport. Another handle is located in front near the auxiliary wheels.... |
Wiha 5 pc. Insulated Nut Drivers, Inch | Product# 00952518000P
Selling for $39.99
()
Precision machined for a perfect, secure fit, these insulated nut drivers from Wiha are super-hardened and tempered for long life performance. 5 pc. kit includes 7/32, 1/4, 5/16, 3/8 and 1/2 in. sizes.... |
Wiha 5 pc. Insulated Nut Drivers, Metric | Product# 00952519000P
Selling for $39.99
()
Precision machined for a perfect, secure fit, these insulated nut drivers from Wiha are super-hardened and tempered for long life performance. 5 pc. kit includes 6mm, 7mm, 8mm, 9mm and 10mm sizes.... |
GearWrench 4 x 40 NC Plug Tap | Product# 00960059000P
Selling for $2.99
()
4 x 40 NC Plug Tap... |
GearWrench 6 x 32 NC Plug Tap | Product# 00960064000P
Selling for $2.99
()
6 x 32 NC Plug Tap... |
GearWrench 8 x 32 NC Plug Tap | Product# 00960065000P
Selling for $2.99
()
8 x 32 NC Plug Tap... |
GearWrench 10 x 24 NC Plug Tap | Product# 00960068000P
Selling for $2.99
()
10 x 24 NC Plug Tap... |
GearWrench 10 x 32 NF Plug Tap | Product# 00960069000P
Selling for $2.99
()
10 x 32 NF Plug Tap... |
GearWrench 12 x 24 NC Plug Tap | Product# 00960071000P
Selling for $2.99
()
12 x 24 NC Plug Tap... |
GearWrench 1/4 Inch x 20 NC HSS Plug Tap | Product# 00960072000P
Selling for $8.99
()
1/4 Inch x 20 NC HSS Plug Tap... |
GearWrench 1/4 Inch x 28 NF HSS Plug Tap | Product# 00960077000P
Selling for $8.99
()
1/4 Inch x 28 NF HSS Plug Tap... |
GearWrench 5/16 Inch x 18 NC Plug Tap | Product# 00960078000P
Selling for $3.99
()
5/16 Inch x 18 NC Plug Tap... |
GearWrench 5/16 Inch x 24 NF Plug Tap | Product# 00960079000P
Selling for $3.99
()
5/16 Inch x 24 NF Plug Tap... |
GearWrench 3/8 Inch x 16 NC Plug Tap | Product# 00960080000P
Selling for $3.99
()
3/8 Inch x 16 NC Plug Tap... |
GearWrench 3/8 Inch x 24 NF Plug Tap | Product# 00960081000P
Selling for $3.99
()
3/8 Inch x 24 NF Plug Tap... |
