Delta 4 in. x 6 in. Belt/Disc Sander | Product# 00998359000P
Selling for $118.99
()
Sand a variety of projects with this 4 in. belt and 6 in. disc sander from Delta. Powered by a 5.2 amp induction motor, this sander runs smoothly and has plenty of power for woodworking needs. The belt unit can be positioned horizontally (for edge or face sanding) or vertically (for contour work or use with the tilting table).... |
Delta 10 in. Drill Press | Product# 00998355000P
Selling for $118.99
()
If an 8 in. drill press is too small for your projects, but a 12 in. model is too expensive for your budget, try this 10 in. drill press from Delta. The SM300 Shopmaster 10-Inch Bench Drill Press has an induction motor for long-lasting, smooth performance while the pivoting motor mount maintains correct belt tension and facilitates speed changes. Other convenient features include a 3-spoke pilot wheel for ease of use, adjustable-position, locking depth stop for accurate depth measurement and repetitive drilling, and a tilting table with slots for fast clamping of work.... |
Delta 10 in. 13.0 amp Compound Miter Saw | Product# 00998354000P
Selling for $120.99
()
This compound miter saw from Delta delivers plenty of cutting power with its 13.0 amp motor and 40T 10 in. blade. The large sliding fence accommodates cuts into extra-wide wood, and the pre-drilled fence also lets you mount wood auxiliary fences for taller work pieces.... |
Delta 9 in. Band Saw | Product# 00998357000P
Selling for $118.99
()
This band saw from Delta features a powerful 3.0 amp motor for smooth, powerful performance with each cut. Its rack-and-pinion table tilt adjustment allows for precision settings from 3 to 45 degrees, and the two-wheel design requires less workbench space while reducing blade breakage.... |
MK Diamond 10 in. Wet Diamond Professional Tile Saw | Product# 00926900000P
Selling for $799.99
()
This saw's rugged, high-torque 1-1/2 hp motor delivers 3,450 rpm. Cuts 20 in. in length and 14 in. diagonally. The professional's choice for cutting marble, ceramic, granite and slate.... |
MK Diamond 7 in. Wet Diamond Tile Saw | Product# 00927697000P
Selling for $299.99
()
Rips 14 in. tile and has high torque universal 1/2 hp. motor with maintenance free self-lubricating pinion and gear box. Cuts to 1-3/4 in. depth. Fully submersible water pump.... |
Palmgren 8" Bench Grinder | Product# 00974898000P
Selling for $198.99
()
Palmgren Grinders and Buffers feature heavy duty construction with powerful, long-life motor for use all day, every day. Provide 88 plus minutes of continuous use at full load with less than 1 percent RPM loss from the stated maximum. Capacitor motors supply the extra current required during start-up and running under load. Large diameter armature shaft with shielded bearings for smooth operation and long-life.... |
Palmgren 7" Bench Grinder | Product# 00974897000P
Selling for $165.99
()
Palmgren Grinders and Buffers feature heavy duty construction with powerful, long-life motor for use all day, every day. Provide 88 plus minutes of continuous use at full load with less than 1 percent RPM loss from the stated maximum. Capacitor motors supply the extra current required during start-up and running under load. Large diameter armature shaft with shielded bearings for smooth operation and long-life.... |
Palmgren 6" Variable Speed Bench Grinder | Product# 00974896000P
Selling for $175.99
()
Palmgren Grinders and Buffers feature heavy duty construction with powerful, long-life motor for use all day, every day. Provide 88 plus minutes of continuous use at full load with less than 1 percent RPM loss from the stated maximum. Capacitor motors supply the extra current required during start-up and running under load.... |
Palmgren 6" Bench Grinder | Product# 00974895000P
Selling for $143.99
()
Palmgren Grinders and Buffers feature heavy duty construction with powerful, long-life motor for use all day, every day. Provide 88 plus minutes of continuous use at full load with less than 1 percent RPM loss from the stated maximum. Capacitor motors supply the extra current required during start-up and running under load. Large diameter armature shaft with shielded bearings for smooth operation and long-life.... |
Palmgren 6" Bench Grinder | Product# 00974894000P
Selling for $99.99
()
Palmgren Grinders and Buffers feature heavy duty construction with powerful, long-life motor for use all day, every day. Provide 88 plus minutes of continuous use at full load with less than 1 percent RPM loss from the stated maximum. Capacitor motors supply the extra current required during start-up and running under load. Large diameter armature shaft with shielded bearings for smooth operation and long-life.... |
Palmgren Arbor Press Stand - Black | Product# 00974885000P
Selling for $226.99
()
The Palmgren arbor press stand provides a sturdy base and optimal height for easy operation. Top Dimension: 11-3/4 inches x 21-15/16 inches. Base Dimensions: 11-15/16 inches x 22-3/16 inches. Height: 36 inches... |
Palmgren 3 Ton Arbor Press | Product# 00974882000P
Selling for $260.99
()
Single leverage 3-ton arbor press for general use such as riveting, pressing, squeezing, punching and bending in repair and production work. Swing: 12-1/2 inches. Anvil Dia.: 6-5/8 inches. Ram Dim.: 1-1/2" x 1-1/2 inches. Max. Work Hgt.: 12-3/4 inches. Base Dim.: 7-7/8" x 17-7/8 inches... |
Palmgren 2 Ton Arbor Press | Product# 00974881000P
Selling for $176.99
()
Single leverage 2-ton arbor press for general use such as riveting, pressing, squeezing, punching and bending in repair and production work. Swing: 11-7/8 inches. Anvil Dia.: 6-5/8 inches. Ram Dim.: 1-1/4" x 1-1/4 inches. Max. Work Hgt.: 8 inches. Base Dim.: 7-7/8" x 16 inches... |
Palmgren 1 Ton Arbor Press | Product# 00974880000P
Selling for $88.99
()
Single leverage 1-ton arbor press is equipped with a hand wheel to perform light and quick press work. Also for general use such as riveting, pressing, squeezing, punching and bending in repair and production work. Swing: 8 inches. Anvil Dia.: 4-1/2 inches. Ram Dim.: 1" x 1 inches. Max. Work Hgt.: 5-1/2 inches. Base Dim.: 5" x 10-1/2 inches... |
Palmgren 0.5 Ton Arbor Press | Product# 00974879000P
Selling for $64.99
()
Single leverage 1/2 ton arbor press for general use such as riveting, pressing, squeezing, punching and bending in repair and production work. Swing: 7-1/2 inches. Anvil Dia.: 3-3/8 inches. Ram Dim.: 3/4" x 3/4 inches. Max. Work Hgt.: 4-5/8 inches. Base Dim.: 5-1/8" x 9-3/8 inches... |
Palmgren Butt & Fillet Weld Gauge - Silver | Product# 00974878000P
Selling for $42.99
()
Palmgren 55501 Weld Gauge is used for accurately checking but fillet welds. This handy tool may be used for measuring the size of convex and concave fillets, maximum convexity, the limit of reinforcement of butts welds and root openings. Made of stainless steel, laser etched and features a threaded pin and finger knob for easy locking of center slide.... |
Palmgren 18-5/8" x 5-3/16" Milling Table | Product# 00974877000P
Selling for $286.99
()
Dual axes positioning compound milling table via three wheel style handles. Table Size: 18-5/8 inches x 6 inches. Height: 5-3/16 inches. Base Size: 12" x 7-7/8 inches. Travel: 12" x 8 inches... |
Palmgren 12" x 6" Cross Slide Table | Product# 00974876000P
Selling for $842.99
()
Palmgren 93-12 is a dual axis table with a 6 inches x 12 inches top and 0 degrees to 90 degrees angular inclination. Top is precision ground to 0.001 inches total indicated reading. Dials are graduated in 0.001" increments and has thumb screws for easy "0" setting. Counter-balanced solid steel ball crank handles enable smooth movement. To eliminate interference with the machine table, the handles do not extend below the base.... |
Palmgren 12" x 6" Cross Slide Table | Product# 00974875000P
Selling for $611.99
()
Palmgren 92-12 is a dual axis table with a 6 inches x 12 inches top. Top is precision ground to 0.001 inches total indicated reading. Dials are graduated in 0.001 inches increments and has thumb screws for easy "0" setting. Counter-balanced solid steel ball crank handles enable smooth movement. To eliminate interference with the machine table, the handles do not extend below the base. This model has a single longitudinal T-slot with three transverse 3/8 inches T-slots.... |
